Taizhou Kaiji Plastic Mould Co.,ltd

High quality product, professional service, being the core supplier in laser industry!

Home > News > Content
PE Pipe Fitting Mould Good Craftsmanship
- Oct 23, 2017 -

The process of the pipe mold refers to the adaptability of the part of the casting mold designed for the processing technology, that is, the design of the pipe mold, PE Pipe Fitting Mould should be based on the skills of the operator and the existing equipment conditions to meet the dimensional accuracy of the premise of parts , PE Pipe Fitting Mould Can be processed by various methods

The craftsmanship of parts has a great influence on production. This is because the pipe mold technology, a direct impact on the ease of processing the parts. In general, the process of good parts, the required ease of processing. In general, the process of good parts, the required processing equipment conditions, to meet the dimensional accuracy of parts under the premise, can be processed through a variety of methods.

The craftsmanship of parts has a great influence on production. This is because the pipe mold technology, a direct impact on the ease of processing the parts. In general, the process of good parts, the required number of processing equipment, easy processing, while saving materials. In addition, the process of a good pipe mold, product quality and stability, the emergence of less waste, the process is simple,PE Pipe Fitting Mould but also to make technical preparations and production management to achieve economic and reasonable. If the design of the parts of the poor process, the production of materials and working hours consumption of large, and sometimes can not produce qualified parts to. Therefore, the pipe mold design, we must meet the technical requirements

The design of the pipe mold, should be easy to meet the parts on the map required processing quality, that is, the structure of parts, should be able to ensure that processing easier, the workload as small as possible.

Pipe fittings molds should be easy to use high productivity processing methods, such as parts of the surface shape distribution should be reasonable, as far as possible the use of standardized and standardized.

Parts should be designed to reduce the processing of parts, that is, PE Pipe Fitting Mould should minimize the processing of the surface to reduce the workload and tool, electrode, material consumption.

Parts of the material should be fully considered easy to process. In the case where possible, leave the retreat position.

When the part is set, the drilling depth should be reduced. As far as possible so that the depth of the hole is not greater than or equal to more than 5 times the aperture.

The structure of the part is conducive to shortening the auxiliary time in the process, PE Pipe Fitting Mould such as in the parts processing, should be easy to locate and clamping.

Parts in the processing should have a good rigidity. Some parts to increase the rigidity, it is best for the ladder structure, such as punching hole punch, small core, the diameter should be different, PE Pipe Fitting Mould and the diameter should be decreasing or increasing in one direction.

The structure of the part shall take into account the safety of the work. Designers in the design of pipe fittings and measuring the structural process, PE Pipe Fitting Mould we must fully consider the entire parts of the possible manufacturing process parts. In order to meet the structural process, we should also pay attention to the conservation of raw materials, should not affect the use of performance conditions, inexpensive materials and appropriate rough manufacturing methods to manufacture various parts to reduce manufacturing costs.